Powered by ScribeFire.
我的RS3么搞定，所以移到OpenSUSE上来搞。
网上有现成的rpm包，找来装上就成，不会有什么麻烦，装完后：
linux:~ # rpm -qa | grep ppp
ppp-2.4.4-24
rp-pppoe-3.8-5
smpppd-1.59-38
linux:~ #
然后就是配置了，主要是在/etc/ppp/目录下，
首先是认证方式：pppoe-server-options文件里，pap or chap，pap不好用，只能用chap;
其次是在相应的文件里指定用户名和密码，比如chap-secrets:
# client server secret IP addresses
"21026A" * "cisco1" 10.74.52.51
"21026AA" * "cisco12" 10.74.52.52
"21026AAA" * "cisco123" 10.74.52.53
再后来就么什么了，启动程序吧：
linux:/etc/ppp # pppoe-server --help
pppoe-server: invalid option -- -
Usage: pppoe-server [options]
Options:
-I if_name -- Specify interface (default eth0.)
-T timeout -- Specify inactivity timeout in seconds.
-C name -- Set access concentrator name.
-m MSS -- Clamp incoming and outgoing MSS options.
-L ip -- Set local IP address.
-l -- Increment local IP address for each session.
-R ip -- Set start address of remote IP pool.
-S name -- Advertise specified service-name.
-O fname -- Use PPPD options from specified file
(default /etc/ppp/pppoe-server-options).
-p fname -- Optain IP address pool from specified file.
-N num -- Allow 'num' concurrent sessions.
-o offset -- Assign session numbers starting at offset+1.
-f disc:sess -- Set Ethernet frame types (hex).
-s -- Use synchronous PPP mode.
-u -- Pass 'unit' option to pppd.
-r -- Randomize session numbers.
-d -- Debug session creation.
-P -- Check pool file for correctness and exit.
-h -- Print usage information.
PPPoE-Server Version 3.8, Copyright (C) 2001-2006 Roaring Penguin
Software Inc.
PPPoE-Server comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under the terms of the GNU General Public License, version 2
or (at your option) any later version.
http://www.roaringpenguin.com
linux:/etc/ppp #
晕了吧，简单点的：
linux:/etc/ppp #pppoe-server -I eth0 -S sipurash -L 10.74.52.50 -R 10.74.52.51 -N 3
明白了吧，easy哈？
RealPlayer might not start if using SCIM as the default input method. When trying to launch from the terminal one gets the error message
Segmentation fault (core dumped)
This issue can be resolved by setting the environment variable GTK_IM_MODULE to the value xim (instead of scim).
export GTK_IM_MODULE=xim
After typing this in a terminal, RealPlayer can be started from this terminal. In order to make this setting the default, one can for example write a small shell script which first sets the above environment variable and then launches the RealPlayer."----copy from that website
From http://goodbye-microsoft.com/ website,you can download a debian.exe file,run it from your windows platform,it will instruct you install a debian system step by step.
Of course,you need keep internet connection.
When you finished base system installation,you will confused why it can't enter a Xwindows system,don't worry,just following http://www.debsir.org 's documents do:
1.apt-get install xorg
2.apt-get install kde-core
3.apt-get install kde-i18n-zhcn(chinese support)
4.apt-get install kmix(for audio)
5.apt-get install gtk2-engines-clearlooks gtk-qt-engine(some themes)
6.apt-get install kdm(login manager)
Then reboot,you can enter
Best Desktop Tools and Office
Installing Slax in the pen drive
Now you choose between two options. You can mount the downloaded ISO image of Slax and follow a few steps, or you can burn the ISO image file to a CD-ROM and use the Slax Installer application. I suggest the first approach, because are some little things you must do to get Slax in the pen drive ready. To do so, create a directory -- say /slaxUSB -- on which to mount the ISO image file of Slax, then mount the ISO image:
mount -o loop slax-killbill-5.0.5.iso /slaxUSB/
Now, as root, mount the formated USB device:
mount -t vfat /dev/sda /mnt/sda/
Note that /mnt/sda/ can be any directory you want to use. Copy the entire contents of the directory mounted with the ISO image to the place where you have mounted the pen drive:
cp -ra /slaxUSB/* /mnt/sda/
The -r argument specifies a recursive copy including every directory, and the -a preserves as much as possible the structure of the data in the USB.
Now you need to copy some files in the folder /boot/ of the mounted pen drive to the root of the pen drive so you can boot from it:
cd /mnt/sda/boot/
cp vmlinuz /mnt/sda/
cp initrd.gz /mnt/sda/
Move to the directory where the memory stick is mounted -- in this case /mnt/sda/ -- and change the name of the file isolinux.cfg to syslinux.cfg. Edit the just-renamed syslinux.cfg and delete /boot/ or boot/ from the lines that contain vmlinuz and initrd.gz -- for example, /boot/vmlinuz and /boot/initrd.gz. This changes the location of the files vmlinuz and initrd.gz, making them visible to the bootloader at the time of boot.
Finally, use whereis to check whether you have Syslinux installed. If not, download and extract it to a directory, then run:
syslinux -s /dev/sda
Where /dev/sda is the location of your recent modified Slax with all the files.
Now, reboot your computer, enter the BIOS, and change the boot order. Set USB-ZIP as the first one, then the hard drive, and so on. If your machine is old it's possible that it won't let you boot from USB, in which case you can use a boot diskette or CD, or use Slax as a live CD."
 | id | UserName | Attribute | op | Value | ||
|---|---|---|---|---|---|---|---|
 |  | 1 | pank | User-Password | == | 1111 | |
| | | 2 | vincent | User-Password | == | 2222 | |
| | | 3 | 520601 | Password | == | 520601 | |
| | | 4 | 512352 | Password | == | 512352 | |
| | | 5 | 2471 | Password | == | 2471 | |
| | | 6 | 512332 | User-Password | == | 512332 | |
| | id | GroupName | Attribute | op | Value | ||
|---|---|---|---|---|---|---|---|
| | | 1 | user | Service-Type | == | Framed-User | |
| | | 2 | user | Framed-Protocol | == | PPP | |
| | | 3 | user | Framed-Compression | == | Van-Jacobsen-TCP-IP | |
